Shohag Gsm™
Posts : 1531
Points : 133084 Reputation : 43 Birthday : 21/12/1989 Join date : 15/03/2011 Age : 34 Location : In your Hard
| Subject: x1 xperia successfully change language from chinesse to english ...guide inside Wed Feb 27, 2013 11:13 pm | |
| problem: Chinese language [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] cable used: usb cable solution: Step 1 (Preparations) - Download and install .NET Framework 3.5 SP1 - If you are using Vista, install the Mobile Device Center 6.1 - Set up the Active Sync (active sync 4.5 for XP) / Mobile Device Center (Vista) connection with your X1 - Charge the battery to at least 50% or more - (Re)Connect the X1 - Run X1_HardSPL.exe - Follow the instructions (it should say something like "Image Version: 1.02.111.7" to "1.00.X1") - If asked, press "Yes" on the X1 - Now a 4-color screen should show up, showing some version Info - After that, a progress bar screen will be shown and the phone will reboot when finished - Click "Finish" on the PC - If you want to check if everything went fine, turn the device off (long power button press), then hold the "volume down" button and turn the device on again, still holding the "volume down" button until the 4-color screen shows up. It should read something like: KOVS110 SPL-0.72.OliNex MicroP1-787 MicroP2-707 - Remove and reinsert the battery to exit bootloader mode Step 2 (Flashing ROMs) download this first(english rom without debranding): [You must be registered and logged in to see this link.] Before you start you have to -obviously- download and extract the ROM you want to flash. The file should be named *.image or *.nbh. Before you follow the steps, rename that file to Kovsimg.nbh. - Format a MicroSD card with FAT32 if not yet done - Copy the Kovsimg.nbh into the root directory of your MicroSD card and insert the card in your phone - Turn off the phone (USB cable not attached) - Remove and reinsert the battery - Hold the volume down button and turn the device on again, still holding both buttons until the 4-color screen shows up. - Follow the onscreen instructions Congratulations. You're done. screen shot: [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] | |
|
Shohag Gsm™
Posts : 1531
Points : 133084 Reputation : 43 Birthday : 21/12/1989 Join date : 15/03/2011 Age : 34 Location : In your Hard
| Subject: Re: x1 xperia successfully change language from chinesse to english ...guide inside Wed Feb 27, 2013 11:14 pm | |
| | |
|
Shohag Gsm™
Posts : 1531
Points : 133084 Reputation : 43 Birthday : 21/12/1989 Join date : 15/03/2011 Age : 34 Location : In your Hard
| Subject: Re: x1 xperia successfully change language from chinesse to english ...guide inside Wed Feb 27, 2013 11:15 pm | |
| some software used: for net frame work: Download details: Microsoft .NET Framework 3.5 Service Pack 1 if you are using vista(syncronization) : Download details: Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit) if you are using XP(syncronization): Download details: ActiveSync 4.5 software for flashing ROMs (HardSPL & NBHUtil): [You must be registered and logged in to see this link.] | |
|
Sponsored content
| Subject: Re: x1 xperia successfully change language from chinesse to english ...guide inside | |
| |
|